Shree Enterprises

Shree Enterprises offers Digital hygrometer / dew point meter. Dew point Meter is an easy way to use and check air temperature, relative humidity, wet bulb temperature and dew point.

We are engaged in offering Rk-900 Digital Coating Thickness Gauge With External Probe to our clients. Our range of all products is widely appreciated by our clients.

A 30kV Holiday Detector Is A High-voltage, Non-destructive Testing Device Used To Detect Pinholes, Cracks, And Other Defects In Coatings, Linings, And Insulation On Metal Surfaces.

Graco Silverplus Airless Spray Gun, 5000 psi (345 bar, 34.5 Mpa). 2 finger trigger. Stainless steel fluid tube. Very useful & trusted Brand in Industrial Painting line. Lighter than other Spray Guns Can continuous work Very Good Painting Finish. For use in manufacturing, construction and fabrication Use with; epoxy coatings, coal tar epoxy primers, polyurethane coatings, tank and pipe coatings and linings and architectural latex emulsion paints.

Product DescriptionThe Digital Surface Profile Gauge will allow the peak to valley height of blast cleaned surfaces to be accurately measured in accordance with the ASTM standard. Caltech's digital surface profile gauge is highly useful and users friendly tool for paint, coating, and corrosion inspection.

The gauge is initially set to zero with the glass zero plate and the foot is then placed on the blasted profile. The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valley, allowing the gauge to display the peak to valley height. A number of measurement can be made and the average taken.

In addition the gauge can also be used to measure the effects of corrosion i.e. pitting and cavity depth etc. Instrument is supplied with calibration certificate traceable to national standards. Surface Profile Gauges are also known as Needle Gauge.

A Shot And Grit Blasting Comparator Is A Tool Used To Measure And Compare The Surface Roughness And Cleanliness Of Blasted Surfaces. It's A Visual Aid That Helps Ensure Consistency And Quality In Blasting Operations

A Pipeline Holiday Detector Is A Specialized Tool Used To Detect Pinholes, Cracks, And Other Defects In Pipeline Coatings, Linings, And Insulation

Pinhole & Porosity

A pinhole is a very small defect present in paints and coatings due to the entrapment of moisture, air, solvents or dust particles in accordance with AS 3894.2, ASTM D5162, ASTM G6, ASTM G62, BS 7793-2, ISO 8289, ISO 14654, JIS K 6766, NACE RP 0188, NACE SP 0188, and NACE TM0384 standards..

9V, 67V, 90V

A Blast Nozzle Gauge Is A Tool Used To Measure The Internal Diameter Of Blast Nozzles, Ensuring Accurate Sizing And Optimal Performance In Blasting Operations. It's Essential For:
1. Blasting Contractors And OperatoRs2. Quality Control And Assurance3. Equipment Maintenance And Troubleshooting4. Nozzle Selection And Replacement5. Compliance With Industry Standards

A Dust Test Kit Is A Collection Of Equipment And Tools Used To Measure And Analyze Dust Levels In Various Environments